The new SF-24 stereo ribbon microphone is a phantom powered version of the popular Royer SF-12 stereo ribbon microphone, combining the SF-12's high quality audio performance, outstanding stereo separation and imaging with Royer's exclusive active electronics system for ribbon microphones. The SF-24's output of -38 dB is a full 14 dB more sensitive than the non-powered Royer SF-12, putting its sensitivity on par with that of phantom powered condenser microphones. The unique electronics and custom designed FET's used in the SF-24 allow for ultra-quiet operation, with self-noise of lower than 18 dB.
Royer SF-24 Microphone
- It's like getting two matched ribbon mics in one package.
- Because the SF-24 is active, you can use just about any mic preamp with it.
- Perfect impedance matching delivers sonic reality
Matched Pair In One
Like an SF-12, the SF-24 is actually two matched ribbon microphones placed one above the other, each aimed 45 degrees from center in the classic Blumlein configuration. The magnet/polepiece structure of each ribbon transducer allows a wide, uniform frequency range with no substantial peaks or dips, and the two 1.8-micron ribbons produce superb transient response. Frequency response is excellent regardless of the angle of sound striking the ribbons and off-axis coloration is negligible. The SF-24's extension cable comes with a Y adapter that splits into separate 3-pin male XLR connectors labeled "Upper" and "Lower" for the upper and lower capsules of the microphone (when held vertically).
More to Gain...
Royer's Active Series ribbon mics (SF-24 and R-122) are as sensitive as phantom powered condenser microphones, allowing you to use almost any mic preamplifier or board pre. Conventional ribbon microphones average 15 to 20dB lower sensitivity than condenser mics, necessitating the use of high-quality, high-gain microphone preamplifiers for recording softer sound sources like acoustic instruments, vocals and room ambiance. The SF-24 contains two fully balanced, discrete head amplifier systems utilizing ultra-low noise FET's, each delivering a sensitivity of -38 dB. This lets you mate an SF-24 to any preamplifier with average gain characteristics. Even with quiet sound sources, you'll have enough gain to drive any recording medium.
The electronics in the SF-24 provide a perfect load to the ribbon elements at all times, allowing the microphone to deliver 100% of its full sonic potential regardless of the input characteristics of the following mic-pre. Due to its low-impedance output, SF-24's can also be used on extremely long cable runs with minimal signal loss.
A good impedance match is critical to ribbon microphones. Impedance mis-matching loads a ribbon improperly, resulting in loss of low end, diminished body, lowered sensitivity and an overall compromised performance. With our Active Series ribbon mics, the ribbon element lives in a perfect world. It sees an optimum impedance match at all times regardless of the following equipment, so its performance will never be compromised by the effects of improper loading. In addition, the ribbon element cannot be damaged by phantom power, electrical glitches or miswired cables.
Royer SF-24 Ribbon Microphone Features
- True stereophonic recording from one microphone
- Active electronics provide high output capability
- Extremely low self noise
- Ribbon element not affected by load presented to microphone element unaffected by heat or humidity
- Equal sensitivity from front and back of elements
- Consistent frequency response regardless of distance to sound source
- Very low magnetic leakage
- Requires +48V phantom power
Royer SF-24 Ribbon Microphone Tech Specs
- Microphone Type Ribbon
- Polar Pattern Crossed Figure-8
- Ribbon Type 2.5-micron Aluminum
- Frequency Response 40Hz-15kHz
- Max SPL 130dB
- Output Impedance 200 ohms
- Connector 5-Pin XLR
- Weight 1.29 lbs.
Duty rates in Indonesia vary with the average duty rate at 10.89%. Import duty and taxes are due when importing goods into Indonesia whether by a private individual or a commercial entity. Import duty payable is calculated on the cost of the imported goods combined with freight charges. More information on import declaration procedures and import restrictions can be found at the Indonesian Customs website. (beacukai.co.id)
Customs Contact Information
- Jl. Ahmad Yani By Pass
- Jakarta - 13230
- Telephone : 134
- Fax : 021-3500842
Secure PayPal Payment
After processing your order you will be redirected to your PayPal account. You will then grant us permission to debit the amount to be paid for the order ( ). AudioBuy Indonesia reserve the right to subsequently propose alternative payment methods in the case of very large sums or if the PayPal credit limit has been exceeded for your purchase.
Returns & Warranty Repair
If your item arrives with any issue , please hold the item and be sure to retain all packing materials. We will arrange for the item to be inspected immediately. Do not return the &nbps; to us unless we have provided an RMA number. We will then work with you to replace the item or refund the purchase price of &nbps; if it is not replaceable.
- Buy products with confidence.
- Free shipping throughout Indonesia - Jakarta , Surabaya , Bandung , Medan , Bekasi and Semerang.
- Return to base repair or replacement (1 Year return to base).
- Please contact AudioBuy Indonesia for detailed information about the warranty we offer to all Indonesian customers.